JTS R-4 Dual Wireless System (Receiver Only)

Transmitters and Microphones sold separately.

JTS R-4TBM / CM-501 transmitter & mic: https://audacious.pro/products/jts-r-4tbm-cm-501-wireless-transmitter-cardioid-lavalier-microphone

JTS CM-501 Mic: https://audacious.pro/products/jts-cm-501-cardioid-lavalier-microphone

The system is designed with JTS newest generation wireless technology. To cope with the squeezed radio spectrum the system provides more compatible channels within limited bandwidth. The R-4 is a 4 channel system in a 19” one U case. Antenna outputs and AC power supply are designed to be cascaded. It provides great convenience to installation.

JTS patented REMOSET feature sends all microphone data by pushing of one button. Moreover all 4 microphones can receive correspondent data at the same time after one pushing. As always JTS provides detailed and full adjustment for best audio and radio performance.

Specifications:

• Frequency Preparation
• PLL Synthesized Control
• Carrier Frequency Range UHF 506-542 MHz
• S / N Ratio > 105dB
• T.H.D <0.6% @ 1KHz
• Display Contents Group, Channel, Frequency, Antenna A/B, Mute Display, AF Meter (LED  BAR), RF Meter (LED BAR) , Battery Status
• Controls Power On/Off, Group, Channel, Frequency Up/Down, Frequency Scan, Audio Level, Lock-on, Output Pad
• Audio Output Level -12dB
• AF Output Impedance 600Ω
• Squelch Pilot Tone & Noise Mute
• Operation Voltage 100 ~ 240V
• Output Connector 4 independent XLR outputs, and 1 Ø6.3mm and 1 XLR for mixed output
• Dimension (m / m) 212.3mm(W)*38.3mm(H)* 144mm(D)
  Notes Actual product specifications may vary depending on region.

Technical Specifications:

Carrier Frequency Range: UHF 506-542 MHz; Signal to Noise Ratio: >105dB; Total Harmonic Distortion: <0.6% @ 1KHz; Audio Output Level: -12dB; AF Output Impedance: 600Ω; Squelch: Pilot Tone & Noise Mute; Operation Voltage: 100-240V; Output Connectors: 4 independent XLR outputs, 1 6.3mm and 1 XLR for mixed output; Dimensions: 212.3mm(W) x 38.3mm(H) x 144mm(D).

Condition Guide. All Stage Gear products are professionally inspected and tested before shipment. 

- Clearance: Brand new, unused inventory that is discontinued or no longer stocked.
- B-Stock: Open-box, demonstration, or lightly used equipment. Fully tested, complete, and in excellent working condition. May show minor cosmetic wear.
- C-Stock: Professionally used equipment. Fully tested and operational with moderate cosmetic wear consistent with normal use.
- D-Stock: Functional B- or C-Stock equipment with cosmetic wear and/or missing accessories. Included components are listed on the product page and additional items may be required before use.

All used equipment is sold in the condition identified on this product page. All sales are final once shipped. No returns, exchanges, or refunds are permitted except as provided noted here. For any Clearance, B-Stock or C-Stock items, these are professionally tested and backed by a 90-day limited warranty against functional defects. Approved warranty claims require the item to be returned to Stage Gear for evaluation. At our discretion, the item will be repaired, replaced, or store credit will be issued. No cash refunds. For D-Stock, these are sold AS IS with no warranty, no returns, no exchanges, and no refunds. For the avoidance of doubt, any cosmetic wear, packaging condition, and other characteristics consistent with the item's condition grade are not considered defects.